Waterproofing for underground structure engineering and building roof engineering.
Without overlapping seams, various irregular or complex base surfaces can be perfectly covered By using mechanical conformal spraying
Super stretchability, The average elongation at break can reach over 1000%, and the recovery rate can reach over 85%. can effectively solve various leakage problems caused by stress deformation, settlement, expansion cracking, puncture, etc. in structures.
Unique back-sticking performance，It can ensure that the waterproof layer is fully adhered to the upstream face of the structure and guarantee the waterproof effect.
It can be constructed on damp substrates
Preparation：The base surface should be derusted, dusted, and decontaminated, and the waterproof construction can only be carried out after the base surface treatment experience is qualified. Depending on the substrate, different types of primers and base treatments can be used.
Application Method：Before spraying, the A component should be stirred slowly and thoroughly.The spray gun should be sprayed perpendicular to the base surface. During the spraying operation, the spraying sequence should be carried out continuously according to the details first and then the whole, and the multiple and cross spraying should meet the design thickness requirements. When applying on a façade or slope, the spray gun should be sprayed in order from bottom to top, from low to high. The lap width between the two spraying surfaces should not be less than 100mm.
According to the design requirements, the reinforcement layer construction shall be carried out in the yin and yang corners of the structure, the pipe root through the wall, the construction joints, the gaps of the metal roof panel, the bolts and other parts.
When stored between 5-40℃, TLS-100 Instant-setting Rubber Modified Asphalt Waterproof material has a shelf life of 12 months from the date of manufacture. It should be Store tightly sealed to prevent air from entering.
Dispose in accordance with all local, state (provincial) and federal regulations. Empty containers may contain hazardous residues. This material and its container must be disposed in a safe and legal manner. It is the user’s responsibility to verify that treatment and disposal procedures comply with local, state (provincial) and federal regulations.
YUGREAT has a fundamental concern for all who make, distribute, and use its products, and for the environment in which we live. This concern is the basis for our product stewardship philosophy by which we assess the safety, health, and environmental information on our products and then take appropriate steps to protect employee and public health and our environment. The success of our product stewardship program rests with each and every individual involved with YUGREAT products - from the initial concept and research, to manufacture, use, sale, disposal, and recycle of each product.
YUGREAT strongly encourages its customers to review both their manufacturing processes and their applications of YUGREAT products from the standpoint of human health and environmental quality to ensure that YUGREAT products are not used in ways for which they are not intended or tested. YUGREAT personnel are available to answer your questions and to provide reasonable technical support. YUGREAT product literature, including safety data sheets, should be consulted prior to use of YUGREAT products. Current safety data sheets are available from YUGREAT.
